National 35, .177 : First Impressions
Posted: Thu Oct 08, 2015 11:32 am
Hi. Got my National 35, .177 caliber air rifle 2 days back. First of all a big salute to all the veterans over here. I have extensively read reviews and suggestions by all of you on ‘Indians For Guns’ forum. The gun was bought from the authorised IHP dealer in Kochi and the purchase experience was really nice. They had two pieces with them and fired a few shots and decided from one among them. The Price was 5.4k at Kochi. I am sure that extensive reviews have been done on the National 35 model air rifle from IHP, however I would like to add my 2 cents so that interested people can know more about the same. I am planning to practice in the local rifle range. So I chose the .177 caliber
.
Front Sight
The fibre optic sight fixed at the muzzle is pretty good in material quality and the blade too seems perfect for the price. Rear Sight
The rear sight assembly is also made of good hard metal. From pictures I have seen online, it seems the top plate of the rear sight has improved in its quality. I have attached pictures as well. Stock As IHP says, the stock wood seems to be good quality hard wood and the finish is also really nice and the stock offers good feel while holding the gun. The screws on the side are tight and there are no loose parts anywhere.
Barrel, Trigger etc
The barrel is rifled and the breech area and the breech seals are well in place and seems to be of good quality. The trigger is little bit hard, but seems to settle down with increasing number of shots. Shooting Experience
As soon as I received the rifle, I started firing it for accuracy on a 10 metre range. The initial results showed that the rear sight needs to be adjusted for windage. The grouping happened to the right side of the target so I adjusted the wandage screw and got pretty good results. Overall, the IHP National 35, .177 seems to be an awesome Air rifle in its own price segment and has excellent feel as well as accuracy. I am planning to start practice at the local Rifle association
. I am a newbie here and dear veterans , please pour in your valuable suggestions to help me out. I am using G Smith, P10 .177 flat head pellets. Are they good enough? Should I try any other brands?
Can anyone suggest about the best options for setting/printing targets for 10 metre practice. When the rifle came to me, some sort of oil was smeared over the barrel and metal parts. I have cleaned the inside of the barrel with cotton swab tied to nylon thread to ensure there is no oil residue inside the barrel, to avoid dieseling. Should I smear oil on the outside metal parts to prevent rusting? If yes, what type of oil?
Is there any occasional lubrication required for any of the parts? When I enquired the Membership at Kottayam Rifle Association costs above 12k and an annual fee of 1.4K. Please suggest if its worth if I am planning for just Air rifle practice?
Front Sight
The fibre optic sight fixed at the muzzle is pretty good in material quality and the blade too seems perfect for the price. Rear Sight
The rear sight assembly is also made of good hard metal. From pictures I have seen online, it seems the top plate of the rear sight has improved in its quality. I have attached pictures as well. Stock As IHP says, the stock wood seems to be good quality hard wood and the finish is also really nice and the stock offers good feel while holding the gun. The screws on the side are tight and there are no loose parts anywhere.
Barrel, Trigger etc
The barrel is rifled and the breech area and the breech seals are well in place and seems to be of good quality. The trigger is little bit hard, but seems to settle down with increasing number of shots. Shooting Experience
As soon as I received the rifle, I started firing it for accuracy on a 10 metre range. The initial results showed that the rear sight needs to be adjusted for windage. The grouping happened to the right side of the target so I adjusted the wandage screw and got pretty good results. Overall, the IHP National 35, .177 seems to be an awesome Air rifle in its own price segment and has excellent feel as well as accuracy. I am planning to start practice at the local Rifle association
Can anyone suggest about the best options for setting/printing targets for 10 metre practice. When the rifle came to me, some sort of oil was smeared over the barrel and metal parts. I have cleaned the inside of the barrel with cotton swab tied to nylon thread to ensure there is no oil residue inside the barrel, to avoid dieseling. Should I smear oil on the outside metal parts to prevent rusting? If yes, what type of oil?