IOF Pistol or Revolver ?

Posts related to handguns (pistols, revolvers)
goodboy_mentor
Old Timer
Old Timer
Posts: 2928
Joined: Sun Dec 07, 2008 12:35 pm

Re: IOF Pistol or Revolver ?

Post by goodboy_mentor » Sat Mar 06, 2010 11:40 am

I would rather spend the money om IOF product use the remaining one for target practice or modifications.Again every one to their own but if one doesnt want to break the bank IOF ( how so every overly priced etc) is a safe bet. Also do check the modifications made by bobby sidhu ( Gun smith) from patiala to members pistol.
I fully agree with the opinion
2. So, you claim the IOF pistols are also good, hmmm I'm taking an U turn now to the title of this thread. Given a preference which one will you be taking (pistol or revolver from IOF only)
It is ultimately what you are comfortable with. Personally I would have preferred to go for pistol, since waiting period is more than 1 year if my need is urgent, I would go for revolver.
3. What is the effective range the available indian/imported bullets for Pistols and Revolvers can fly to attack the target effectively ?
Please refer http://ofbindia.gov.in/products/data/am ... /sc/12.htm The effective range of .32 to penetrate human body to cause damage appears limited, if one goes by above data it should be around 30 feet. Experts in this forum who have fired and tested the penetration in some target at the range may give better idea about the exact range.
4. What is the rimmed and rimless bullet ?
Please refer Semi-automatic vs. revolver cartridges at http://en.wikipedia.org/wiki/Cartridge_%28firearms%29 and http://ofbindia.gov.in/products/data/am ... /sc/12.htm IOF .32 revolver cartridges are rimmed and IOF .32 pistol cartridges are rimless.
"If my mother tongue is shaking the foundations of your State, it probably means that you built your State on my land" - Musa Anter, Kurdish writer, assassinated by the Turkish secret services in 1992

For Advertising mail webmaster
winnie_the_pooh
Veteran
Veteran
Posts: 1776
Joined: Fri Aug 21, 2009 1:49 pm

Re: IOF Pistol or Revolver ?

Post by winnie_the_pooh » Sat Mar 06, 2010 2:30 pm

In the older revolvers the firing pin was a part of the hammer itself.Now the firing pin is pinned into the frame.You can clearly see this in the pictures Olly posted of his IOF .32 revolver.

rjshv
Fresh on the boat
Fresh on the boat
Posts: 13
Joined: Sat Mar 06, 2010 2:59 am
Location: Coimbatore

Re: IOF Pistol or Revolver ?

Post by rjshv » Sun Mar 07, 2010 12:11 am

ngrewal & trammway,

Like you've rightly said, finding a good imported revolver or pistol is like a treasure hunt, but when you land a good one, then it's a treasure. Maintenance is more important than age. 'Antique' does not mean it won't do the job. Anyway, since imported seem to be out of favour, the IOF is ok. If it was me, I'd buy a revolver. I'v just seen enough pistols jam with the KF cartridges. Then there's the problem of keeping a pistol loaded. The magazine's spring weakens in due course when kept always loaded.

Unless you're very sure of what you're doing, don't ever modify a gun except for the visual stuff and accessories.

As for distance, it does'nt matter how long the bullet travels. Be aware that the average shooter can manage to shoot with acceptable accuracy only up to 30 feet or so from a small handgun. Beyond that, you are likely to miss the entire target. So longer range could only be a safety hazard if anything. Anyway, I THINK the travelling distance would be 300ft and killing range upto 150 ft. Correct me if am wrong.

Trammway, I think you are talking about rimfire and centerfire cartridges. To tell the difference, I shall quote what is a good explanation:

"Rimfire cartridges are an older design. In a rimfire cartridge, the priming compound (impact-sensitive substance that produces the spark to ignite the gunpowder) is located inside the hollow rim of the cartridge case. The firing pin crushes the rim against the chamber mouth to fire the cartridge.

In a centerfire cartridge, the priming compound is located inside a small metal cup called a primer, which is made separate from the casing. The cup is inserted into a hole in the center of the base of the cartridge. The firing pin strikes the primer to set the cartridge off.

Rimfire cases are made of soft brass so that the firing pin can crush the rim. However, this makes them unsuitable for higher chamber pressures. Centerfire cartridge brass is much harder, because only the primer cup needs to be soft. With the switch from black powder to smokeless powder, higher chamber pressures became commonplace and rimfire cartridges became obsolete. The only common rimfire cartridge in use today is .22LR, popular for target shooting and pest control." Today, all other cartriges except the .22 are centerfire.
V. Rajesh
When guns are outlawed, only outlaws will have guns.

trammway
On the way to nirvana
On the way to nirvana
Posts: 73
Joined: Mon Feb 22, 2010 12:01 pm
Contact:

Re: IOF Pistol or Revolver ?

Post by trammway » Sun Mar 07, 2010 12:47 pm

Guys, You are all amazing. When I was starting the thread I was completely out of idea how to go about after getting a license. To be honest, now I know what are the most important factors deciding a handgun. What you have posted in the thread is real eye-opener for not only me to anyone who is thinking of buying a weapon.

I greatly appreciate all your inputs, as the imported guns are on the lucky star side I'm hooking myself with IOF only. Though many of you have given preference to IOF revolvers my personal choice for the look and feel is towards IOF pistols and very much understand the jamming issue, however i'm not very much convinced of accuracy part between the two, if only one of you can provide more details on accuracy with justifiable reason. You may curse me for taking this decision, however after I get my license (I'm very positive here) based on the waiting period of Pistols and Revolvers I will chose one of them without any dilemma.

By the way I heard a news that the foreign weapon manufacturer are now seeking permission to pave roads to their entry into to India. Hmmm if only they do that when I get my licence in my hand what else is required for me to start another thread :) he he he.

baljit759
Fresh on the boat
Fresh on the boat
Posts: 2
Joined: Mon Oct 05, 2009 1:47 pm
Location: Chandigarh, India

Re: IOF Pistol or Revolver ?

Post by baljit759 » Thu Jul 28, 2011 8:51 pm

The webley revolvers would be anything from 20 to a 100 year old.Many are in a very poor shape.Fakes abound.Some are chambered for the .320 cartridge.
Dear Winnie the Pooh,
Need your expert opinion - Can a .32 cal S&W cartridge be safely used in a Webley & Scott revolver chambered for the .320 cartridge?

winnie_the_pooh
Veteran
Veteran
Posts: 1776
Joined: Fri Aug 21, 2009 1:49 pm

Re: IOF Pistol or Revolver ?

Post by winnie_the_pooh » Thu Jul 28, 2011 11:15 pm

baljit759 wrote:
The webley revolvers would be anything from 20 to a 100 year old.Many are in a very poor shape.Fakes abound.Some are chambered for the .320 cartridge.
Dear Winnie the Pooh,
Need your expert opinion - Can a .32 cal S&W cartridge be safely used in a Webley & Scott revolver chambered for the .320 cartridge?
.32 S&W short and not the common S&W Long

Post Reply